|
Product Details:
|
| Combination Method: | 2P | Single Capacity: | 850mah |
|---|---|---|---|
| Pack Capacity: | 1700mah | PVC: | Customized |
| Charging Voltage: | 4.2V | Nominal Voltage: | 3.7V |
| High Light: | high capacity lithium polymer battery,lithium ion polymer battery pack |
||
Model:
Li-Polymer battery Pack
3.7V rechargeable batteries
Polymer lithium battery
Lithium ion battery
Li-ion Polymer Battery
Rechargeable Li Ion 502460 Lithium Polymer Battery 2P 3.7V 1700mah
Major Application:
1) MP3/MP4 player, bluetooth, speakers, car GPS and all possible electronics products
2) Widely applied in Telecommunications, Audio and Video Devices, Information Devices...Etc.
Li-Polymer battery Product Advantages:
1) Environmental friendly
2) High density of energy
3) Light weight
4) Low self-discharge
5) Low internal resistance
6) Long cycle life, chargeable up to 500 or 1000 times
7) No memory effect
8) Doesn’t contain Mercury, No fire, No explosion, No leakage
9) Very good and quick charge, capability can be charged to 90% within 10 min.
10) Thickness can be adjusted while width and height keep the same
Product Specification:
| Package |
No. |
Item |
General Parameter |
Remark |
|
| 1 |
Combination method |
2P
|
|||
| 2 |
Rated Capacity |
Typical |
1700mAh |
0.2C5A Standard discharge after Standard charge(package) |
|
|
Minimum |
1650mAh | ||||
| 3 |
Nominal Voltage |
3.7V |
Mean Operation Voltage |
||
| 4 |
Voltage at end of |
3.0V |
Discharge Cut-off Voltage |
||
| 5 |
Charging Voltage |
4.2V | |||
| 6 |
Internal Impedance |
≤150mΩ |
Internal resistance measured at AC 1KHZ after 50% charge |
||
| 7 |
Standard charge |
Constant Current 0.2C5A |
|
||
| 8 |
Standard discharge |
Constant current 0.2C5A |
|
||
| 9 |
Maximum Continuous Charge Current |
0.5C5A | 850mA | ||
Appearance
There shall be no such defect as flaw, crack, rust, leakage, which may adversely affect
commercial value of battery.
Standard Test Conditions:
Test should be conducted with new batteries within one week after shipment from our factory
and the cells shall not be cycled more than five times before the test.
Unless otherwise specified, test and measurement shall be done under temperature of 20±5℃
and relative humidity of 45~85%.
If it is judged that the test results are not affected by such conditions, the tests may be
conducted at temperature 15~30℃ and humidity 25~85%RH.
Li ion Polymer Lithium Rechargeable Battery 2P LP502460 1700mah 3.7V:
Contact Person: Mrs. Cindy
Tel: 86-0755-8465 9653
