One stop service from R&D, production to marketing on primary lithium batteries, rechargegable batteries and battery pack.

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsLithium Battery Pack

Lu’s Technology Co., Limited

Good quality Lithium Manganese Dioxide Battery for sales
I'm Online Chat Now

E Bike Lithium Battery Pack 36V Rechargeable Lithium Batteries Customized Case

China E Bike Lithium Battery Pack 36V Rechargeable Lithium Batteries Customized Case supplier

Large Image :  E Bike Lithium Battery Pack 36V Rechargeable Lithium Batteries Customized Case

Product Details:

Place of Origin: China
Brand Name: LUS
Model Number: 36V and 48V S3

Payment & Shipping Terms:

Minimum Order Quantity: 1 pcs
Price: Bargain
Packaging Details: wood
Delivery Time: 15-25 days
Payment Terms: L/C, T/T, Western Union
Supply Ability: 10000pcs/Month
Contact Now
Detailed Product Description
Type: Rechargeable Battery Pack Case: Customized
Package: Cartons Or Wood Cells: 18650
Voltage 1: 48V


 18650 50pcs Battery Pack 48V for E bike Lithium Battery Pack 36V




Model Li-ion Rechargeable Lithium Battery Pack
Voltage of Cell 3.7 V
Voltage for Pack 36V and 48V
Cells 18650
Structure 10S5P/13S4P
PCM Protect
Terminals Wires and Connector
Case Customized




Type No.: S3


Voltage: 36V/48V




Recommended to install the electric core number:18650 50PCS


Optional Cells:Samsung:22P,26F,29E,32E,33G





There shall be no such defect as flaw, crack, rust, leakage, which may adversely affect
commercial value of battery.

Lithium Ion Battery Pack Attention:

Prohibition short circuit
Never marke short circuit cell.It generates very high current which causes heating of the cells and may cause electrolyte leakage are very dangerous.
The Li-Fe tabs may be easily short-circuited by putting them on conductive surface.
Such outer short circuit may lead to heat generation and damage of the cell.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the battery pack.
Notice for Designing Battery Pack
Pack toughness
Battery pack should have sufficient styength and the Li-Fe cell inside should be protected from mechanical shocks.
Cell fixing
The Li-Fe cell should be fixed to the battery pack by its large surface area.
No cell movement in the battery pack should be allowed.
Inside design
No sharp edge components should be insides the pack containing the Li-Fe cell.
Tab connection
Spot welding is recommended for Li-Fe tab connection method.
Battery pack should be designed that shear force are not applied to the Li-Fe tabs.
If apply manual solder met hod to connect tab with PCM.below notice is very important to ensure battery
◆·The solder iron should be temperature controlled and ESD safe;
◆·Soldering temperature should not exceed 350℃;
◆·Soldering time should not be longer than 3s;
◆·Soldering times should not exceed 5 times,Keep battery tab cold down before next time soldrictly g;
◆·Directly heat cell body is strictly prohibited,Battery may damaged by heat above approx.100℃.
 For mishaps
Battery pack should be designed not to generate heat even when leakage occurs due to mishaps.
1)Isolate PCM (Protection Circuit Module) form leaked electrolyte as perfectly as perfectly as possible.
2)Avoid narrow spacing between bare circuit patterns with different voltage.(Including around connector)
3)Li-Fe battery should not have liquid from electrolyte,but in case if leaked electrolyte as possible touch bare circuit patterns,higher potential terminal material may dissolve and precipitate at the lower potential terminal,and may cause short circuit,The design of the PCM must have this covered.
Notice for Assembling Battery Pack
Shocks,high temperature,or contacts of sharp edge components should not be allowed in battery pack assembling process.
48V Lithium Battery Pack for E Bike Battery 36V:
E Bike Lithium Battery Pack 36V Rechargeable Lithium Batteries Customized Case


Contact Details
Lu’s Technology Co., Limited

Contact Person: Cindy

Tel: +8618676677658

Send your inquiry directly to us (0 / 3000)