|
Product Details:
|
| Color: | Silver | PCM: | Yes |
|---|---|---|---|
| Terminals: | Customized | Nominal Voltage: | 3.7V |
| Charging Voltage: | 4.2V | Capacity: | 250mah |
| High Light: | lithium ion polymer rechargeable battery,high capacity lithium polymer battery |
||
Model:
Li-Polymer battery 402035
3.7V rechargeable batteries
Polymer lithium battery PL402035
Lithium ion battery
Li-ion Polymer Battery
Li Ion 402035 Lithium Polymer Battery 3.7V 250mah Rechargeable
Lithium Polymer Battery Li ion Major Application:
1) MP3/MP4 player, bluetooth, speakers, car GPS and all possible electronics products
2) Widely applied in Telecommunications, Audio and Video Devices, Information Devices...Etc.
Specification:
|
No.
|
Item
|
General Parameter
|
Remark
|
| 1 |
Maximum Continuous Charge Current ( |
1.0 C5A | 150mA |
| 2 |
Maximum Continuous Discharge Current
|
1.0C5A | 150mA |
| 3 |
Operation Temperature Range
|
Charge: 0~45℃ |
60±25%R.H. Bare Cell
|
| Discharge: -20~85℃ | |||
| 4 |
Storage Temperature Range
|
Less than 1 year: -20~25℃
|
60±25%R.H. at the shipment state
|
|
less than 3 months: -20~45℃
|
|||
| 5 |
Weight
|
Approx: 4.5g
|
Bare Cell
|
| 7 |
Pack Dimension
|
Height: Max.35.5mm
|
Initial Dimension
|
|
Width: Max. 20.5mm
|
|||
|
Thickness: Max.4.2mm
|
Li-Polymer battery Product Advantages:
1) Environmental friendly
2) High density of energy
3) Light weight
4) Low self-discharge
5) Low internal resistance
6) Long cycle life, chargeable up to 500 or 1000 times
7) No memory effect
8) Doesn’t contain Mercury, No fire, No explosion, No leakage
9) Very good and quick charge, capability can be charged to 90% within 10 min.
10) Thickness can be adjusted while width and height keep the same
Standard Test Conditions:
Test should be conducted with new batteries within one week after shipment from our factory
and the cells shall not be cycled than five times before the test.
Unless otherwise specified, test and measurement shall be done under temperature of 20±5℃
and relative humidity of 45~85%.
If it is judged that the test results are not affected by such conditions, the tests may be
conducted at temperature 15~30℃ and humidity 25~85%RH.
Appearance
There shall be no such defect as flaw, crack, rust, leakage, which may adversely affect
commercial value of battery.
Lithium Polymer Battery 3.7V 250mah LP402035:
Contact Person: Mrs. Cindy
Tel: 86-0755-8465 9653
