Place of Origin:
China
Brand Name:
OEM
Model Number:
AAA700
Model:
Nickel Cadmium Battery
1.2V NICD Battery 700mah
NICD AAA 700mah 1.2V Rechargeable Cell
1.2V Rechargeable Battery NICD
Application of NiCd Battery
Cordless Phones
Camcorders,
Digital Cameras
Emergency Backup Lightings
Mining Light
LED Torch
Alarm System
Pocket Flashlights
Power Tools
E-Toys
E-Tooth Brusher
Brushes Shaver
Metal Detectors
Medical Device
Characteristics:
High capacity and long cycle life
Rapid charge performance
Low inner resistance and low self-discharge
Safety and reliability
Wide temperature range
Specially designed battery can be used in high and low temperature
External Appearance:
The cell / battery shall be free from cracks, scars, breakage, rust, discoloration, leakage nor
deformation.
Warranty:
One (1) year limited warranty against workmanship and material defects.
Notes:
1: Ta: Ambient Temperature
2: Approximate charge time from discharged state, for reference only.
3: IEC 61951:2003 Cycle Life Test:
| Cycle number | Charge | Rest | Discharge |
| 1 | 0.1C×16hrs | None | 0.25C× 2hrs20mins |
| 2-48 | 0.25C× 3hrs10mins | None | 0.25C×2hrs20mins |
| 49 | 0.25C× 3hrs10mins | None | 0.25C× 1.0V/cell |
| 50 | 0.1C×16hrs | 1-4hr(s) | 0.2C×1.0V/cell |
| Cycles 1 to 50 shall be repeated until the discharge duration on any 50th cycle becomes less than 3hrs | |||
Caution:
(1) Reverse charging is not acceptable.
(2) Charge before use. The cells/batteries are delivered in an uncharged state.
(3) Do not charge/discharge with more than our specified current.
(4) Prevent short circuit, do not incinerate or disassemble the cell/battery.
(5) Do not solder directly to the cell/battery for a long time.
(6) The life expectancy may be reduced if the cell/battery is subjected adverse conditions like: extreme temperature, deep cycling, excessive overcharge/ over-discharge.
(7) Store the cell/battery in a cool and dry place. Always discharge batteries before assemble or solder.
(8) Always discharge batteries before bulk storage or shipment.
(9) Do not mix batteries of different types and capacities.
NICD Testing :
| Test | Specification | Conditions | Remarks |
| Leakage |
No leakage nor deformation. |
Fully charged at 700mA(1C), Stand for 14 days |
Unit cell |
| External Short Circuit |
No fire and no explosion. |
After standard charge, short circuit the cell(s) at 20+/-5℃ until the cell(s) temperature returns to ambient temperature (The resistance of the inter-connecting circuitry shall not exceed 0.1ohm). |
Unit cell |
| Vibration Resistance |
Charge of voltage Should be under 0.02V/cell, Change of impedance should be under 5 milli-ohm/cell. |
Charge the battery 0.1C 16hrs, then leave for 24hrs, check battery before/after vibration, Amplitude:1.5mm Vibration:3000CPM Any direction for 60mins. |
Unit cell |
| Impact Resistance |
Change of voltage should be under 0.02V/cell, Change of impedance should be under 5 milli-ohm/cell. |
Charge the battery 0.1C16hrs, then leave for 24hrs, check battery before/after dropped, Height:50cm Wooden board (thickness 30mm) Direction not specified 3times. |
Unit cell |
Rechargeable Battery 1.2V NICD AAA700mah :
Send your inquiry directly to us
