Place of Origin:
China
Brand Name:
OEM
Model Number:
SC2200
Model: Nickel Cadmium Battery
Voltage: 1.2V
Size: SC
Capacity: 2200mah
NICD Battery 1.2V Nickel Cadmium Battery SC2200mah
Application of NiCd Battery
Cordless Phones
Camcorders,
Digital Cameras
Emergency Backup Lightings
Mining Light
LED Torch
Alarm System
Pocket Flashlights
Power Tools
E-Toys
E-Tooth Brusher
Brushes Shaver
Metal Detectors
Medical Device
Characteristics:
High capacity and long cycle life
Rapid charge performance
Low inner resistance and low self-discharge
Safety and reliability
Wide temperature range
Specially designed battery can be used in high and low temperature
Test Conditions:
Unless otherwise stated, tests should be done within one month after receipt under the
following conditions:
Ambient Temperature ,Ta : 20±5℃ and
Relative Humidity : 65±20%
Temperature range for operation (Humidity:Max.85%)
Charge 0~+55℃
Discharge 0~+55℃
Caution:
(1) Reverse charging is not acceptable.
(2) Charge before use. The cells/batteries are delivered in an uncharged state.
(3) Do not charge/discharge with more than our specified current.
(4) Prevent short circuit, do not incinerate or disassemble the cell/battery.
(5) Do not solder directly to the cell/battery for a long time.
(6) The life expectancy may be reduced if the cell/battery is subjected adverse conditions like: extreme temperature, deep cycling, excessive overcharge/ over-discharge.
(7) Store the cell/battery in a cool and dry place. Always discharge batteries before assemble or solder.
(8) Always discharge batteries before bulk storage or shipment.
(9) Do not mix batteries of different types and capacities.
Nickel Cadmium Battery 1.2V Type:
Model | Spec. | Dimension(mm) | Capacity | Rapid Charge | Internal Impedance | Weight(g) | ||
Diameter | High | Nominal | Current(mA) | Time(h) | Range(mΩ) | |||
5A | 5A12 | 7.0 +0 -0.7 | 41.5±0.5 | 120 | 60 | 2.1 | 40~60 | 4.5 |
AAA | 2/3AAA18 | 10.5 +0 -0.7 | 28.0±0.5 | 180 | 180 | 1.2 | 50~70 | 6 |
AAA | 2/3AAA22 | 10.5 +0 -0.7 | 28.0±0.5 | 220 | 220 | 30~55 | 7 | |
AAA | 2/3AAA22J | 10.5 +0 -0.7 | 29.5±0.5 | 220 | 220 | 30~55 | 7.5 | |
AAA | AAA22 | 10.5 +0 -0.7 | 43.0±0.5 | 220 | 220 | 30~55 | 8 | |
AAA | AAA22J | 10.5 +0 -0.7 | 44.0±0.5 | 220 | 220 | 30~55 | 8 | |
AAA | AAA30 | 10.5 +0 -0.7 | 43.0±0.5 | 300 | 300 | 30~55 | 9.5 | |
AAA | AAA30J | 10.5 +0 -0.7 | 44.0±0.5 | 300 | 300 | 30~55 | 9.5 | |
AAA | AAA35 | 10.5 +0 -0.7 | 43.0±0.5 | 350 | 350 | 30~55 | 9.5 | |
AAA | AAA35J | 10.5 +0 -0.7 | 44.0±0.5 | 350 | 350 | 30~55 | 9.5 | |
AA | 1/3AA18 | 14.5 +0 -0.7 | 17.0±0.5 | 180 | 180 | 1.2 | 35~55 | 7 |
AA | 1/3AA18P | 14.5 +0 -0.7 | 17.0±0.5 | 180 | 180 | 15~40 | 7.5 | |
AA | 1/2AA30 | 14.5 +0 -0.7 | 24.5±0.5 | 300 | 300 | 35~55 | 9 | |
AA | 2/3AA30 | 14.5 +0 -0.7 | 28.5±0.5 | 300 | 300 | 25~40 | 10 | |
AA | 2/3AA30J | 14.5 +0 -0.7 | 30.0±0.5 | 300 | 300 | 25~40 | 10 | |
AA | 2/3AA40 | 14.5 +0 -0.7 | 28.5±0.5 | 400 | 400 | 25~40 | 11 | |
AA | 2/3AA40J | 14.5 +0 -0.7 | 30.0±0.5 | 400 | 400 | 25~40 | 12 | |
AA | 5/7AA40 | 14.5 +0 -0.7 | 34.5±0.5 | 400 | 400 | 30~45 | 13 | |
AA | 5/7AA50 | 14.5 +0 -0.7 | 34.5±0.5 | 500 | 500 | 30~45 | 13 | |
AA | 4/5AA30 | 14.5 +0 -0.7 | 42.5±0.5 | 300 | 300 | 20~40 | 13 | |
AA | 4/5AA60 | 14.5 +0 -0.7 | 42.5±0.5 | 600 | 600 | 20~40 | 18 | |
AA | 4/5AA80 | 14.5 +0 -0.7 | 42.5±0.5 | 800 | 400 | 2.1 | 20~45 | 18.5 |
AA | AA35 | 14.5 +0 -0.7 | 48.5±0.5 | 350 | 350 | 1.2 | 20~45 | 12.6 |
AA | AA35J | 14.5 +0 -0.7 | 49.5±0.5 | 350 | 350 | 20~45 | 12.6 | |
AA | AA40 | 14.5 +0 -0.7 | 48.5±0.5 | 400 | 400 | 20~40 | 13.6 | |
AA | AA40J | 14.5 +0 -0.7 | 49.5±0.5 | 400 | 400 | 20~40 | 13.6 | |
AA | AA45 | 14.5 +0 -0.7 | 48.5±0.5 | 450 | 450 | 25~45 | 14.6 | |
AA | AA45J | 14.5 +0 -0.7 | 49.5±0.5 | 450 | 450 | 25~45 | 14.6 | |
AA | AA50 | 14.5 +0 -0.7 | 48.5±0.5 | 500 | 500 | 25~45 | 15.6 | |
AA | AA50J | 14.5 +0 -0.7 | 49.5±0.5 | 500 | 500 | 25~45 | 15.6 | |
AA | AA60 | 14.5 +0 -0.7 | 48.5±0.5 | 600 | 600 | 25~40 | 16.6 | |
AA | AA60J | 14.5 +0 -0.7 | 49.5±0.5 | 600 | 600 | 25~40 | 16.6 | |
AA | AA65 | 14.5 +0 -0.7 | 48.5±0.5 | 650 | 650 | 20~35 | 17 | |
AA | AA65J | 14.5 +0 -0.7 | 49.5±0.5 | 650 | 650 | 20~35 | 17 | |
AA | AA70 | 14.5 +0 -0.7 | 48.5±0.5 | 700 | 700 | 25~40 | 17.8 | |
AA | AA70J | 14.5 +0 -0.7 | 49.5±0.5 | 700 | 700 | 25~40 | 17.8 | |
AA | AA80 | 14.5 +0 -0.7 | 48.5±0.5 | 800 | 800 | 25~40 | 19.5 | |
AA | AA80J | 14.5 +0 -0.7 | 50.0±0.5 | 800 | 800 | 25~40 | 19.5 | |
AA | AA80T | 14.5 +0 -0.7 | 48.5 +0 -0.8 | 800 | 240 | 3.6 | 20~40 | 22 |
AA | AA85 | 14.5 +0 -0.7 | 48.5±0.5 | 850 | 850 | 1.2 | 25~40 | 20.5 |
AA | AA90 | 14.5 +0 -0.7 | 48.5±0.5 | 900 | 900 | 20~40 | 20.5 | |
AA | AA90J | 14.5 +0 -0.7 | 50.0±0.5 | 900 | 900 | 20~40 | 20.5 | |
AA | AA100 | 14.5 +0 -0.7 | 48.5±0.5 | 1000 | 500 | 2.1 | 25~40 | 20.5 |
AA | AA100J | 14.5 +0 -0.7 | 50.0±0.5 | 1000 | 500 | 25~40 | 20.5 | |
AA | AA110 | 14.5 +0 -0.7 | 49.0±0.5 | 1100 | 550 | 20~40 | 21.5 | |
AA | AA110J | 14.5 +0 -0.7 | 50.0±0.5 | 1100 | 550 | 20~40 | 21.5 | |
AA | 4/3AA120 | 14.5 +0 -0.7 | 65.0±0.5 | 1200 | 1200 | 1.2 | 15~35 | 27 |
A | 2/3A60 | 17.0 +0 -0.7 | 27.5±0.5 | 600 | 600 | 1.2 | 20~40 | 16 |
A | 2/3A60P | 17.0 +0 -0.7 | 27.5±0.5 | 600 | 300 | 2.1 | 20~40 | 17 |
A | 4/5A110 | 17.0 +0 -0.7 | 42.5±0.5 | 1100 | 550 | 20~40 | 26 | |
A | 4/5A120 | 17.0 +0 -0.7 | 42.5±0.5 | 1200 | 600 | 20~40 | 26.5 | |
A | A135 | 17.0 +0 -0.7 | 49.5±0.5 | 1350 | 1350 | 1.2 | 10~30 | 30 |
A | A140 | 17.0 +0 -0.7 | 49.5±0.5 | 1400 | 700 | 2.1 | 10~45 | 30 |
A | A140P | 17.0 +0 -0.7 | 49.5±0.5 | 1400 | 420 | 3.6 | 10~30 | 32 |
A | 4/3A200 | 17.0 +0 -0.7 | 66.5±0.5 | 2000 | 1000 | 2.1 | 15~35 | 43 |
SC | 4/5SC120 | 23.0 +0 -1.0 | 33.5±0.5 | 1200 | 600 | 2.1 | 10~20 | 36 |
SC | 4/5SC120P | 23.0 +0 -1.0 | 33.5±0.5 | 1200 | 600 | 10~20 | 36.5 | |
SC | SC130 | 23.0 +0 -1.0 | 42.5±0.5 | 1300 | 650 | 8~20 | 43 | |
SC | SC130P | 23.0 +0 -1.0 | 42.5±0.5 | 1300 | 650 | 8~20 | 43.5 | |
SC | SC140 | 23.0 +0 -1.0 | 42.5±0.5 | 1400 | 700 | 8~20 | 44 | |
SC | SC140P | 23.0 +0 -1.0 | 42.5±0.5 | 1400 | 700 | 8~20 | 44.5 | |
SC | SC150 | 23.0 +0 -1.0 | 42.5±0.5 | 1500 | 750 | 8~20 | 45 | |
SC | SC150P | 23.0 +0 -1.0 | 42.5±0.5 | 1500 | 750 | 8~20 | 45.5 | |
SC | SC160 | 23.0 +0 -1.0 | 42.5±0.5 | 1600 | 800 | 8~20 | 46 | |
SC | SC160P | 23.0 +0 -1.0 | 42.5±0.6 | 1600 | 800 | 8~20 | 46.5 | |
SC | SC170 | 23.0 +0 -1.0 | 42.5±0.5 | 1700 | 850 | 8~20 | 47 | |
SC | SC170P | 23.0 +0 -1.0 | 42.5±0.6 | 1700 | 850 | 8~20 | 47.5 | |
SC | SC180 | 23.0 +0 -1.0 | 42.5±0.5 | 1800 | 900 | 8~20 | 47.5 | |
SC | SC180P | 23.0 +0 -1.0 | 42.5±0.5 | 1800 | 900 | 8~20 | 47 | |
SC | SC180T | 23.0 +0 -1.0 | 42.5±0.5 | 1800 | 540 | 3.6 | 6~25 | 49 |
SC | SC200 | 23.0 +0 -1.0 | 42.5±0.5 | 2000 | 1000 | 2.1 | 8~25 | 47.5 |
SC | SC220P | 23.0 +0 -1.0 | 42.5±0.5 | 2000 | 1100 | 6~20 | 49 | |
SC | 4/3SC220 | 23.0 +0 -1.0 | 49.5±0.5 | 2200 | 1100 | 8~20 | 52 | |
C | 2/3C100 | 25.8 +0 -1.0 | 29.5±0.5 | 1000 | 500 | 2.1 | 10~20 | 46 |
C | C180 | 25.8 +0 -1.0 | 48.5±0.5 | 1800 | 900 | 10~20 | 57 | |
C | C180J | 25.8 +0 -1.0 | 50.0±0.5 | 1800 | 900 | 10~20 | 57.5 | |
C | C250 | 25.8 +0 -1.0 | 48.5±0.5 | 2500 | 1250 | 6~25 | 64 | |
C | C250J | 25.8 +0 -1.0 | 50.0±0.5 | 2500 | 1250 | 6~25 | 64 | |
C | C280 | 25.8 +0 -1.0 | 48.5±0.5 | 2800 | 1400 | 6~25 | 68.5 | |
C | C280J | 25.8 +0 -1.0 | 50.0±0.5 | 2800 | 1400 | 6~25 | 68.5 | |
C | C300 | 25.8 +0 -1.0 | 48.5±0.5 | 3000 | 1500 | 3.6 | 6~25 | 70.5 |
C | C300J | 25.8 +0 -1.0 | 50.0±0.5 | 3000 | 1500 | 6~25 | 70.5 | |
C | C220T | 25.8 +0 -1.0 | 49.5±0.5 | 2200 | 660 | 6~25 | 67 | |
C | C220TJ | 25.8 +0 -1.0 | 50.0±0.5 | 2200 | 660 | 6~25 | 67 | |
D | D400 | 33.0 +0 -1.0 | 60.0+0 -1.5 | 4000 | 2000 | 2.1 | 6~20 | 110 |
D | D400J | 33.0 +0 -1.0 | 61.5+0 -1.5 | 4000 | 2000 | 6~20 | 110 | |
D | D500 | 33.0 +0 -1.0 | 60.0+0 -1.5 | 5000 | 1500 | 3.6 | 4~20 | 131 |
D | D500J | 33.0 +0 -1.0 | 61.5+0 -1.5 | 5000 | 1500 | 4~20 | 131 | |
D | 1/2D250 | 33.0 +0 -1.0 | 36.0 +0 -1.5 | 2500 | 1250 | 2.1 | 6~20 | 74.5 |
D | 1/2D250J | 33.0 +0 -1.0 | 37.5 +0 -1.5 | 2500 | 1250 | 6~20 | 74.5 | |
D | 4/3D700 | 33.0 +0 -1.0 | 90.0 +0 -1.5 | 7000 | 2100 | 3.6 | 6~25 | 168.5 |
D | D400T | 33.0 +0 -1.0 | 60.0+0 -1.5 | 4000 | 1200 | 6~20 | 117.5 | |
D | 1/2D220T | 33.0 +0 -1.0 | 36.0 +0 -1.0 | 2200 | 660 | 6~20 | 74 | |
N | N33 | 12.0 +0 -0.7 | 30.0±0.5 | 330 | 165 | 2.1 | 30~50 | 9.5 |
N35 | 12.0 +0 -0.7 | 30.0±0.5 | 350 | 175 | 30~50 | 10 | ||
M | M1000 | 42.0+0 -1.0 | 91.0 +0 -1.5 | 10000 | 2000 | 6.5 | 6~20 | 272 |
Notes:
1: Ta: Ambient Temperature
2: Approximate charge time from discharged state, for reference only.
3: IEC 61951: 2003 Cycle Life Test:
Cycle number | Charge | Rest | Discharge |
1 | 0.1C×16hrs | None | 0.25C× 2hrs20mins |
2-48 | 0.25C× 3hrs10mins | None | 0.25C×2hrs20mins |
49 | 0.25C× 3hrs10mins | None | 0.25C× 1.0V/cell |
50 | 0.1C×16hrs | 1-4hr(s) | 0.2C×1.0V/cell |
Cycles 1 to 50 shall be repeated until the discharge duration on any 50th cycle becomes less than 3hrs |
1.2V Rechargeable Battery NICD SC2200mah Picture:
Send your inquiry directly to us