ER34615 D Cell Lithium Battery 3.6V 19000mAh Non Rechargeable Batteries

ER34615 D Cell Lithium Battery 3.6V 19000mAh D Cell Battery 3.6v Non-rechargeable batteries

ER34615 3.6v Lithium Battery 19000mAh (Non-rechargeable batteries,They can't contact the power when you use the batteries,also can't instead of the 1.2V,1.5V Battery )

(Pay attention: they can't contact the power when you use the batteries)Long shelf life: at least 10 years

Superior operation in low and high temperature environments(-55 to +85 degree).

Battery Height: 2.42 inch； Diameter:1.33 inch

Work for Orbita Sparta watch winder, Memory backup: E.L.T(Emergency Locator Transmitter) CMOS memory, RTC(real time clock) and computer backup

ER34615 lithium thionyl chloride battery 3.6V 19Ah

ER34615 Technical data:

Important Notes:

Do not short or charge the battery.

Over-discharging, crushing, incinerating, and disassembling the battery are prohibited.

Do not heat/use the battery beyond the permitted temperature range.

Characteristics:

1. High energy density (620Wh/Kg); which is the highest among all lithium batteries.

2. High open circuit voltage (3.66V for single cell), high operating voltage (varying with load, normally ranging from 3.3V to 3.6V).

3. Wide range of operating temperature(-55C~+85C).

4. Stable voltage and current, over 90% of the cell capacity is discharged at high plateau voltage.

5. Long operating time (over 8 years) for continuous low current discharge with medium current pulses.

6. Low self-discharge rate (less than 1% per year) and long storage life (over 10 year under normal room temperature).

Application:

Utility Metering,

Automatic Meter Reading,

Medical Electronics,

Memory Backup,

Tracking Systems,

Law Enforcement (RFID),

Earthquake Detectors,

Digital Control Devices,

Remote Monitory Systems,

Electronic Toll Tags,

Scientific Instruments,

Portable Communication

Equipment,

Military Radio Stations,

And other electric powered devices requiring small size,

High power batteries.

Drawing:

S: Standard termination

Notes:

Dimension: mm

Special terminations can be Made as requested.

T: Solder tabs

P: Axial pins